Skyjacker 1088H Uživatelský manuál stáhnout pdf

1. Perform pre-alignment checks in a normal manner. Hook-up alignment gauges & record readings.

2. Support the vehicle by the lower control arms.

3. Remove ONE upper control arm bolt at a time. Note: Remove the OEM welded washer & escess

weld. It may be necessary to elongate the hole in the upper control arm. Clean the surface area

from the cam contacts of any body sealant or weld slag. The cam must operate on a smooth

surface.

4. Install the cam, lock washer, & nut. Snug up the nut, but leave loose enough to allow for

adjustment.

5. Replace the tire / wheel & alignment equipment.

6. Adjust the cams to the needed camber & torque the nuts to 80-100 ft. lbs., while holding the bolt

head with a wrench.

7. Check all readings & adjust as necessary.

Seat Belts Save Lives, Please Wear Your Seat Belt.

I-1088H REV1 3-11 Pg 1

1988-1998 1500/2500

IFS GM 4x4

Eccentric Cam Kit

Part # 1088H

www.skyjacker.com

1 2

1. Perform pre-alignment checks in a normal manner. Hook-up alignment gauges & record readings. 2. Support the vehicle by the lower control arms.3

Check out our favorite ministries at:www.innministries.orgwww.familychurch.orgwww.kcm.orgJesus Forgives, Rocks Don’tJesus Christ Died For You.John

Žádné komentáře

Skyjacker 1088H Uživatelský manuál